/* This example will receive multiple universes via Artnet and control a strip of ws2811 leds via Adafruit's NeoPixel library: https://github.com/adafruit/Adafruit_NeoPixel This example may be copied under the terms of the MIT license, see the LICENSE file for details */ #include #include #include #include #include // Neopixel settings const int numLeds = 240; // change for your setup const int channelsPerLed = 3; const int numberOfChannels = numLeds * channelsPerLed; // Total number of channels you want to receive (1 led = 3 channels) const byte dataPin = 2; Adafruit_NeoPixel leds = Adafruit_NeoPixel(numLeds, dataPin, NEO_GRB + NEO_KHZ800); // Artnet settings Artnet artnet; const int startUniverse = 0; // CHANGE FOR YOUR SETUP most software this is 1, some software send out artnet first universe as 0. int previousDataLength = 0; // Change ip and mac address for your setup byte ip[] = {10, 0, 1, 199}; byte mac[] = {0x04, 0xE9, 0xE5, 0x00, 0x69, 0xEC}; byte broadcast[] = {10, 0, 1, 255}; void setup() { //Serial.begin(115200); artnet.begin(mac, ip); leds.begin(); artnet.setBroadcast(broadcast); initTest(); // this will be called for each packet received artnet.setArtDmxCallback(onDmxFrame); artnet.setArtSyncCallback(onSync); } void loop() { // we call the read function inside the loop artnet.read(); } void onDmxFrame(uint16_t universe, uint16_t length, uint8_t sequence, uint8_t* data, IPAddress remoteIP) { // read universe and put into the right part of the display buffer for (int i = 0; i < length / channelsPerLed; i++) { int led = i + (universe - startUniverse) * (previousDataLength / channelsPerLed); if (led < numLeds) { if (channelsPerLed == 4) leds.setPixelColor(led, data[i * channelsPerLed], data[i * channelsPerLed + 1], data[i * channelsPerLed + 2], data[i * channelsPerLed + 3]); if (channelsPerLed == 3) leds.setPixelColor(led, data[i * channelsPerLed], data[i * channelsPerLed + 1], data[i * channelsPerLed + 2]); } } previousDataLength = length; } void onSync(IPAddress remoteIP) { leds.show(); } void initTest() { for (int i = 0 ; i < numLeds ; i++) leds.setPixelColor(i, 127, 0, 0); leds.show(); delay(500); for (int i = 0 ; i < numLeds ; i++) leds.setPixelColor(i, 0, 127, 0); leds.show(); delay(500); for (int i = 0 ; i < numLeds ; i++) leds.setPixelColor(i, 0, 0, 127); leds.show(); delay(500); for (int i = 0 ; i < numLeds ; i++) leds.setPixelColor(i, 0, 0, 0); leds.show(); }