/*
*******************************************************************************
* Copyright (c) 2022 by M5Stack
*                  Equipped with M5Core sample source code
*                          配套  M5Core 示例源代码
* Visit for more information: https://docs.m5stack.com/en/unit/ir
* 获取更多资料请访问: https://docs.m5stack.com/zh_CN/unit/ir
*
* Describe: ir.
* Date: 2021/8/27
*******************************************************************************
  Please connect to Port B,Use IR Unit to receive and test infrared receiving
and transmitting 请连接端口B,使用红外单元接收和测试红外接收和发射.
*/

#include <M5Stack.h>

int ir_recv_pin = 36;  // set the input pin.  设置引脚
int ir_send_pin = 26;

int last_recv_value = 0;
int cur_recv_value  = 0;

void setup() {
    M5.begin();
    M5.Power.begin();
    pinMode(ir_recv_pin, INPUT);
    pinMode(ir_send_pin, OUTPUT);
    // send infrared light.  发送红外线
    // now, you can see the infrared light through mobile phone camera.
    // 现在，你可以通过手机摄像头看到红外光
    digitalWrite(ir_send_pin, 1);
    M5.Lcd.setTextSize(2);
    M5.Lcd.setCursor(0, 0);
    M5.Lcd.print("Test for IR receiver: ");
}

void loop() {
    // now, once you press the button on a remote controller to send infrared
    // light.  现在，一旦你按下遥控器上的按钮发送红外线 the screen will display
    // "detected!"  屏幕将显示“检测到!”
    cur_recv_value = digitalRead(ir_recv_pin);
    if (last_recv_value != cur_recv_value) {
        M5.Lcd.setCursor(0, 25);
        M5.Lcd.fillRect(0, 25, 150, 25, BLACK);
        if (cur_recv_value ==
            0) {  // 0: detected 1: not detected,  0检测到,1没有检测到
            M5.Lcd.print("detected!");
        }
        last_recv_value = cur_recv_value;
    }
    Serial.println(cur_recv_value);
}