// The MIT License (MIT)
//
// Copyright (c) 2018 M5Stack
// Author: bin@m5stack.com (0x1abin)
//
// Permission is hereby granted, free of charge, to any person obtaining a copy
// of this software and associated documentation files (the "Software"), to deal
// in the Software without restriction, including without limitation the rights
// to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
// copies of the Software, and to permit persons to whom the Software is
// furnished to do so, subject to the following conditions:
//
// The above copyright notice and this permission notice shall be included in
// all copies or substantial portions of the Software.
//
// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
// IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
// FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
// AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
// LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
// OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
// THE SOFTWARE.

#ifndef _M5BALA_H
#define _M5BALA_H

#include "Arduino.h"
#include "Wire.h"
#include "imuCalibration.h"

#define MOTOR_RPM 150
#define MAX_PWM   255
#define DEAD_ZONE 20

#define M5GO_WHEEL_ADDR 0x56
#define MOTOR_CTRL_ADDR 0x00
#define ENCODER_ADDR    0x04

class M5Bala {
   public:
    M5Bala();
    M5Bala(TwoWire &w);

    void begin();
    void run();
    void PIDCompute();
    void setMotor(int16_t pwm0, int16_t pwm1);
    void readEncder();
    uint8_t i2c_readByte(uint8_t address, uint8_t subAddress);

    void setAngleOffset(float offset) { angle_offset = offset; };
    float getAngle() { return pitch; };
    int16_t getSpeed0() { return speed_input0; };
    int16_t getSpeed1() { return speed_input1; };
    int16_t getOut0() { return pwm_out0; };
    int16_t getOut1() { return pwm_out1; };

    int16_t left_offset, right_offset;
    int16_t forward_offset;

    // control
    void stop();
    void move(int16_t speed, uint16_t duration = 0);
    void turn(int16_t speed, uint16_t duration = 0);
    void rotate(int16_t speed, uint16_t duration = 0);

   private:
    TwoWire *wire;
    float yaw, pitch, roll;
    int16_t speed_input0, speed_input1;
    int16_t pwm_out0, pwm_out1;
    int8_t angle_offset;
    uint32_t loop_interval;
    float K1, K2, K3, K4, K5;
    uint8_t imu_id;
};

#endif