/*
    DHT12.cpp - Library for DHT12 sensor.
    v0.0.1 Beta
    Created by Bobadas, July 30,2016.
    Released into the public domain.
*/
#include "DHT12.h"

#include "Arduino.h"
#include "Wire.h"

DHT12::DHT12(byte scale, byte id) {
    if (id == 0 || id > 126)
        _id = 0x5c;
    else
        _id = id;
    if (scale == 0 || scale > 3)
        _scale = CELSIUS;
    else
        _scale = scale;
}

byte DHT12::read() {
    Wire.beginTransmission(_id);
    Wire.write(0);
    if (Wire.endTransmission() != 0) return 1;
    Wire.requestFrom(_id, 5);
    for (int i = 0; i < 5; i++) {
        datos[i] = Wire.read();
    };
    delay(50);
    if (Wire.available() != 0) return 2;
    if (datos[4] != (datos[0] + datos[1] + datos[2] + datos[3])) return 3;
    return 0;
}

float DHT12::readTemperature(byte scale) {
    float resultado = 0;
    byte error      = read();
    if (error != 0) return (float)error / 100;
    if (scale == 0) scale = _scale;
    switch (scale) {
        case CELSIUS:
            resultado = (datos[2] + (float)datos[3] / 10);
            break;
        case FAHRENHEIT:
            resultado = ((datos[2] + (float)datos[3] / 10) * 1.8 + 32);
            break;
        case KELVIN:
            resultado = (datos[2] + (float)datos[3] / 10) + 273.15;
            break;
    };
    return resultado;
}

float DHT12::readHumidity() {
    float resultado;
    byte error = read();
    if (error != 0) return (float)error / 100;
    resultado = (datos[0] + (float)datos[1] / 10);
    return resultado;
}