void ledBlink (int Led, int blink_qty, int blink_time) {
for (int i = 0 ; i < blink_qty ; i++) {
digitalWrite(Led, LOW) ;
delay(blink_time);
digitalWrite(Led, HIGH);
delay(blink_time);
}
}
void startESP() {
EEPROM.begin(512);
Serial.begin(115200);
pinMode(Blue_Led, OUTPUT);
digitalWrite(Blue_Led, HIGH);
pinMode(Red_Led, OUTPUT);
digitalWrite(Red_Led, LOW);//red led on
delay(500);
Serial.println("Starting ES8266");
}
void setupWifi(){
if (!ReadConfig()) {
// DEFAULT CONFIG
config.ssid = "Freebox-6F7B3C";
config.password = "accessorem6-gignendi7-insultare!";
config.dhcp = true;
config.IP[0] = 192; config.IP[1] = 168; config.IP[2] = 0; config.IP[3] = 100;
config.Netmask[0] = 255; config.Netmask[1] = 255; config.Netmask[2] = 255; config.Netmask[3] = 0;
config.Gateway[0] = 192; config.Gateway[1] = 168; config.Gateway[2] = 0; config.Gateway[3] = 254;
config.ntpServerName = "0.de.pool.ntp.org";
config.Update_Time_Via_NTP_Every = 0;
config.timezone = -10;
config.daylight = true;
config.DeviceName = "UKI_ESP_default";
config.AutoTurnOff = false;
config.AutoTurnOn = false;
config.TurnOffHour = 0;
config.TurnOffMinute = 0;
config.TurnOnHour = 0;
config.TurnOnMinute = 0;
WriteConfig();
Serial.println("General config applied");
}
if (AdminEnabled) {
WiFi.mode(WIFI_AP_STA);
//WiFi.softAP( ACCESS_POINT_NAME , ACCESS_POINT_PASSWORD);
WiFi.softAP( config.DeviceName.c_str() , ACCESS_POINT_PASSWORD);
}
else { WiFi.mode(WIFI_STA); }
ConfigureWifi();
while (WiFi.status() != 3) {
Serial.println(WiFi.status());
}
// Serial.print(".");
// digitalWrite(Blue_Led, Blue_Led_State);
// Blue_Led_State = !Blue_Led_State;
// yield();
// }
Serial.println(WiFi.status());
/* A MODIFIER : pour le moment si AdminEnabled, lance pendant AdminTimeOut un AP en parallèle de la connection configurée
* devrait être remplacé par - tente de se connecter au wifi configuré, si ok on continue normalement
* - si n'arrive pas à se connecter au wifi configuré, passe en mode AP avec webserver pour reconfigurer le wifi / ou demarrer en mode AP si bouton utilisateur appuyé pendant démarragae
* - normalement redémarre après reconfiguration, donc ok
* - eventuellement ajouter dans loop un redemarrage en cas de perte de connection
*/
}
void setupWebserver(){
server.on ( "/", []() {digitalWrite(Blue_Led, LOW); Serial.println("admin.html"); server.send ( 200, "text/html", web_AdminMainPage ); digitalWrite(Blue_Led, HIGH); } );
server.on ( "/admin.html", []() {digitalWrite(Blue_Led, LOW); Serial.println("admin.html"); server.send ( 200, "text/html", web_AdminMainPage ); digitalWrite(Blue_Led, HIGH); } );
server.on ( "/config.html", send_network_configuration_html );
server.on ( "/info.html", []() { digitalWrite(Blue_Led, LOW) ; Serial.println("info.html"); server.send ( 200, "text/html", web_Information ); digitalWrite(Blue_Led, HIGH) ; } );
server.on ( "/ntp.html", send_NTP_configuration_html );
server.on ( "/general.html", send_general_html );
server.on ( "/style.css", []() { digitalWrite(Blue_Led, LOW) ; Serial.println("style.css"); server.send ( 200, "text/plain", web_Style_css ); digitalWrite(Blue_Led, HIGH) ; } );
server.on ( "/microajax.js", []() { digitalWrite(Blue_Led, LOW) ; Serial.println("microajax.js"); server.send ( 200, "text/plain", web_microajax_js ); digitalWrite(Blue_Led, HIGH); } );
server.on ( "/admin/values", send_network_configuration_values_html );
server.on ( "/admin/connectionstate", send_connection_state_values_html );
server.on ( "/admin/infovalues", send_information_values_html );
server.on ( "/admin/ntpvalues", send_NTP_configuration_values_html );
server.on ( "/admin/generalvalues", send_general_configuration_values_html);
server.on ( "/admin/devicename", send_devicename_value_html);
server.onNotFound ( []() {
Serial.println("Page Not Found");
server.send ( 400, "text/html", "Page not Found" );
ledBlink(Blue_Led, 10, 100);
} );
server.begin();
Serial.println( "HTTP server started" );
tkSecond.attach(1, Second_Tick);
UDPNTPClient.begin(2390); // Port for NTP receive
}
void loopWebserver(){
if (AdminEnabled) {
if (AdminTimeOutCounter > AdminTimeOut) {
AdminEnabled = false;
Serial.println("Admin Mode disabled!");
WiFi.mode(WIFI_STA);
}
}
if (config.Update_Time_Via_NTP_Every > 0 ) {
if (cNTP_Update > 5 && firstStart) {
NTPRefresh();
cNTP_Update = 0;
firstStart = false;
}
else if ( cNTP_Update > (config.Update_Time_Via_NTP_Every * 60) ) {
NTPRefresh();
cNTP_Update = 0;
}
}
if (DateTime.minute != Minute_Old) {
Minute_Old = DateTime.minute;
if (config.AutoTurnOn)
if (DateTime.hour == config.TurnOnHour && DateTime.minute == config.TurnOnMinute) {
Serial.println("SwitchON");
}
}
Minute_Old = DateTime.minute;
if (config.AutoTurnOff) {
if (DateTime.hour == config.TurnOffHour && DateTime.minute == config.TurnOffMinute) {
Serial.println("SwitchOff");
}
}
}
void setupOTA(){
ArduinoOTA.onStart([]() {
Serial.println("Start");
digitalWrite(Red_Led, HIGH);
digitalWrite(Blue_Led, LOW);
delay(1000);
digitalWrite(Blue_Led, HIGH);
delay(500);
});
ArduinoOTA.onEnd([]() {
Serial.println("End");
digitalWrite(Blue_Led, HIGH);
delay(1000);
ledBlink(Blue_Led, 3, 100);
});
ArduinoOTA.onProgress([](unsigned int progress, unsigned int total) {
Serial.printf("Progress: %u%%\n", (progress / (total / 100)));
digitalWrite(Blue_Led, Blue_Led_State);
Blue_Led_State = !Blue_Led_State;
});
ArduinoOTA.onError([](ota_error_t error) {
Serial.printf("Error[%u]: ", error);
if (error == OTA_AUTH_ERROR) Serial.println("Auth Failed");
else if (error == OTA_BEGIN_ERROR) Serial.println("Begin Failed");
else if (error == OTA_CONNECT_ERROR) Serial.println("Connect Failed");
else if (error == OTA_RECEIVE_ERROR) Serial.println("Receive Failed");
else if (error == OTA_END_ERROR) Serial.println("End Failed");
digitalWrite(Blue_Led, HIGH);
});
ArduinoOTA.begin();
}
void loopHandles(){
if (loop_counter == 10) {
loop_counter = 0;
server.handleClient();
Red_Led_State = !Red_Led_State;
digitalWrite(Red_Led, Red_Led_State);
delay(10);
}
if (loop_counter == 5) {
ArduinoOTA.handle();
delay(10);
}
loop_counter += 1;
if (Refresh) {
Refresh = false;
///Serial.println("Refreshing...");
//Serial.printf("FreeMem:%d %d:%d:%d %d.%d.%d \n",ESP.getFreeHeap() , DateTime.hour,DateTime.minute, DateTime.second, DateTime.year, DateTime.month, DateTime.day);
}
}